LDAP
In this guide we will cover how to manually configure a 7.1 Appliance’s external authentication to work against LDAP. This provides LDAP users access to the Appliance UI as well as the REST API.
In these examples, the LDAP domain used will be example.com
Note: The SSSD and OpenLDAP configurations shown below are simply examples. Depending on the Ldap environment, Ldap directory server used, the configurations can widely differ. Many other options are available to the authconfig command as well as the sssd.conf configuration file.
The following reference are available for customizing SSSD for any LDAP directory:
# man authconfig # man ldap.conf # man sssd-ldap
The document @ https://onemoretech.wordpress.com/2014/02/23/sssd-for-ldap-auth-on-linux/ is also helpful.
Testing OpenLDAP
With SSL
For Configuring external authentication to Ldap, the sssd-ldap communication must be secured (SSL or Start TLS). So an SSL Certificate needs to be created.
The apacheds-cert.pem certificate file is used in the examples below.
Update the LDAP Directory Server to point to the keystore for the certificate. This is used for both SSL and Start TLS.
For SSL, update the /etc/openldap/ldap.conf accordingly to test:
SASL_NOCANON on URI ldaps://ldap-example.com:10636 BASE dc=example,dc=com TLS_REQCERT demand TLS_CACERTDIR /etc/openldap/cacerts TLS_CACERT /etc/openldap/cacerts/apacheds-cert.pem
Then try out a search:
# ldapsearch -x -H ldaps://ldap-example:10636 -LLL \
-b "ou=people,dc=example,dc=com" -s sub \
"(objectclass=organizationalPerson)"
With User Bind DN and Password
You can also test the ldap directory by specifying a user Bind DN and password on the Ldap search command line as follows:
# ldapsearch -x -H ldap://ldap-example:389 -LLL \
-b "ou=people,dc=example,dc=com" -s sub \
-D "ui=:userid,ou=People,dc=example,dc=com" -w :password \
"(objectclass=organizationalPerson)"
Configure SSSD
Configure the Operating System for SSSD based authentication against an LDAP server.
Note: SSSD must be configured to communicate with LDAP over SSL or Start TLS. Otherwise an authentication error will be returned to the Appliance login screen.
Configure SSSD based authentication against LDAP via SSL:
# authconfig \
--enablesssd \
--enablesssdauth \
--enablelocauthorize \
--enableldap \
--enableldapauth \
--ldapserver=ldaps://ldap-example.com:10636 \
--disableldaptls \
--ldapbasedn=dc=example,dc=com \
--enablerfc2307bis \
--enablecachecreds \
--update
Update sssd.conf
Edit the different sections in /etc/sssd/sssd.conf for the Appliance as in the following example, customizing the main [domain/example.com] section for the particular Ldap installation.
=> [domain/example.com]
autofs_provider = ldap
id_provider = ldap
auth_provider = ldap
chpass_provider = ldap
ldap_schema = rfc2307bis
ldap_uri = ldaps://ldap-example.com:10636
ldap_id_use_start_tls = False
=> ldap_tls_cacertdir = /etc/openldap/cacerts
=> ldap_tls_cacert = /etc/openldap/cacerts/apacheds-cert.pem
=> ldap_pwd_policy = none
ldap_search_base = dc=example,dc=com
=> ldap_network_timeout = 3
=> ldap_user_search_base = ou=people,dc=example,dc=com
=> ldap_user_object_class = posixAccount
=> ldap_user_name = uid
=> ldap_user_uid_number = uidNumber
=> ldap_group_object_class = groupOfNames
=> ldap_group_search_base = ou=user_groups,dc=example,dc=com
=> ldap_group_name = cn
=> ldap_group_member = member
cache_credentials = True
=> entry_cache_timeout = 600
=> ldap_user_extra_attrs = mail, givenname, sn, displayname
[sssd]
=> domains = example.com
config_file_version = 2
=> services = nss, pam, ifp
=> sbus_timeout = 30
=> default_domain_suffix = example.com
[nss]
homedir_substring = /home
[pam]
=> default_domain_suffix = example.com
=> [ifp]
=> default_domain_suffix = example.com
=> allowed_uids = apache, root
=> user_attributes = +mail, +givenname, +sn, +displayname
Testing SSSD Updates
The best way to test manual SSSD updates is to query a user via the message bus system (D-Bus) API. When user attributes and groups are properly returned, that is a good indication that the External Authentication would succeed.
For the dbus-send command to succeed when run from command line, SELinux must be in permissive mode.
# setenforce 0
After each update to sssd.cond, restart the sssd service before testing the changes.
systemctl restart sssd
Example query of user attributes for user evmuser. This primarily validates the ldap_user_ attributes of sssd.conf.
# dbus-send --print-reply --system --dest=org.freedesktop.sssd.infopipe /org/freedesktop/sssd/infopipe org.freedesktop.sssd.infopipe.GetUserAttr string:evmuser array:string:mail,givenname,sn,displayname
Query groups of user evmuser. This primarily validates the ldap_group_ attributes of sssd.conf.
# dbus-send --print-reply --system --dest=org.freedesktop.sssd.infopipe /org/freedesktop/sssd/infopipe org.freedesktop.sssd.infopipe.GetUserGroups string:evmuser
With logging for each of the sssd.conf section in the appropriate /var/log/sssd/ log file. The log files of primary interest are:
| Log File | Type of debugging |
|---|---|
/var/log/sssd/sssd.log |
SSSD communication with processes |
/var/log/sssd/sssd_example.com.log |
sssd-ldap communication to the LDAP server |
/var/log/sssd/sssd_ifp.log |
Gathering user and group information from LDAP server |
For each of the log file here, an debug level attribute (maximum value of 9) can be added to the appropriate sssd.conf section as follows:
[ifp]
=> debug_level = 9
default_domain_suffix = example.com
...
When done testing, re-enable SELinux enforcing mode.
# setenforce 1
Note: When testing authentication on the Appliance, if updates are done in LDAP and not immediately seen when authenticating, then clean the SSSD cache as follows then retry:
# sss_cache -E
Configure Apache
Create the Apache configuration files
# TEMPLATE_DIR="/var/www/miq/system/TEMPLATE"
# cp ${TEMPLATE_DIR}/etc/pam.d/httpd-auth \
/etc/pam.d/httpd-auth
# cp ${TEMPLATE_DIR}/etc/httpd/conf.d/manageiq-remote-user.conf \
/etc/httpd/conf.d/
# cp ${TEMPLATE_DIR}/etc/httpd/conf.d/manageiq-external-auth.conf.erb \
/etc/httpd/conf.d/manageiq-external-auth.conf
Update the Apache configuration file /etc/httpd/conf.d/manageiq-external-auth.conf as follows to specify the correct realm:
...
<Location /dashboard/kerberos_authenticate>
AuthType Kerberos
AuthName "Kerberos Login"
KrbMethodNegotiate On
KrbMethodK5Passwd Off
=> KrbAuthRealms example.com
Krb5KeyTab /etc/http.keytab
Require pam-account httpd-auth
ErrorDocument 401 /proxy_pages/invalid_sso_credentials.js
</Location>
...
Configure SELinux
For SSSD to Ldap, assure that non-standard Ldap ports (other than 389 or 636) are allowed:
# semanage port -a -t ldap_port_t -p tcp 10389 # semanage port -a -t ldap_port_t -p tcp 10636
Set appropriate SELinux permissions:
# setsebool -P allow_httpd_mod_auth_pam on # setsebool -P httpd_dbus_sssd on
Restart Services
# systemctl restart sssd # systemctl restart httpd
Configure Administrative UI
Login as admin, then in Configure→Configuration→Authentication
-
Set mode to External (httpd)
-
Check: Get User Groups from External Authentication (httpd)
-
Do not check: Enable Single Signon since Kerberos is not configured against LDAP.
-
Click Save.
The above steps need to be done on each UI and WebService enabled appliance.
in Configure→Configuration→Access Control
-
Make sure the user’s LDAP group for the appliance are created and appropriate roles assigned to those groups.